Tous les produits
  • HUATEC GROUP CORPORATION
    Bob
    Type de pouce d'Astm E114-15 acier au carbone 1018 de bloc d'essai d'étalonnage Mini Iiw 2
  • HUATEC GROUP CORPORATION
    William
    Type de pouce d'Astm E114-15 acier au carbone 1018 de bloc d'essai d'étalonnage Mini Iiw 2
  • HUATEC GROUP CORPORATION
    À M
    Type de pouce d'Astm E114-15 acier au carbone 1018 de bloc d'essai d'étalonnage Mini Iiw 2
  • HUATEC GROUP CORPORATION
    Lion
    Type de pouce d'Astm E114-15 acier au carbone 1018 de bloc d'essai d'étalonnage Mini Iiw 2
Personne à contacter : Noah
Numéro de téléphone : +8613911115555
Je suis désolé. : +8613910983110

HRA HRC HRB Huatec Hardness Test Blocks

  • HRA HRC HRB Huatec Hardness Test Blocks
  • HRA HRC HRB Huatec Hardness Test Blocks
  • HRA HRC HRB Huatec Hardness Test Blocks
  • HRA HRC HRB Huatec Hardness Test Blocks
  • HRA HRC HRB Huatec Hardness Test Blocks
Lieu d'origine Pékin
Nom de marque HUATEC
Certification ISO, CE, GOST
Numéro de modèle HRA,HBW,HV,HR,HLD et HLG
Quantité de commande min 1 pièces
Détails d'emballage Paquet d'exportation standard
Délai de livraison 1-4days
Conditions de paiement T/T, PayPal, Western Union
Capacité d'approvisionnement 500 pièces par mois

Contactez-moi pour des échantillons gratuits et des coupons.

Je suis désolé.:0086 18588475571

Je suis sur WeChat.: 0086 18588475571

Skype est là.: sales10@aixton.com

Si vous avez des préoccupations, nous fournissons une aide en ligne 24 heures sur 24.

x
Détails sur le produit
Plage de mesure HRA 22 à 88; Le poids 00,3 kg
Les dimensions 60X10 Échelle de dureté HRA,HBW,HV,HR,HLD et HLG
Garantie 12 mois Nom du produit Blocs d'essai de dureté
Mettre en évidence

hra hardness test blocks

,

huatec hardness test blocks

,

hrc hardness standard test blocks
Laisser un message
Description de produit
Portable Hardness Testers Portable Hardness Tester Support HRA, HRC, HRB Hardness Test Blocks
 
Introduction for Brinell hardness test blocks:
Brinell hardness test blocks:Range of 8 ~ 650 HBW,Brinell hardness measurement principle is to use a certain test force F (N), the size of the diameter D (mm) of the quenching steel or hard alloy ball pressure into the surface of the metal being measured (figure 1), after the prescribed time unloading test force, with a reading microscope to measure indentation average diameter D (mm), and then, according to the formula and brinell hardness HB value or D from has been prepared based on brinell hardness scale found in HB values.
 
As the metal materials are hard and soft, the measured workpiece is thick and thin, large and small, if only a standard test force F and pressure head diameter D, will appear to some workpiece and material inappropriate phenomenon. Therefore, in the production of brinell hardness test, can use different size of test force and the pressure head diameter, for the same kind of materials with different F when testing and D, it can get the same brinell hardness value, the key lies in the geometry of the indentation of the similar, can establish and D F a matching relationship, to ensure the invariance of brinell hardness.
 
Features:
generally speaking, the smaller the brinell hardness, the softer the material, the larger the indentation diameter; Conversely, the larger the brinell hardness, the harder the material, the smaller the indentation diameter. The advantage of brinell hardness measurement is that it has high measurement accuracy, large indentation area, can reflect the average hardness of the material in a large range, the hardness measured is also more accurate, the data repeatability is strong.
 
Application:
brinell hardness measurement method is applicable to cast iron, non-ferrous alloy, all kinds of annealed and tempered steel, it is not suitable to measure too hard, too small, too thin and the surface is not allowed to have larger indentation pattern or workpiece.
 
According to the national standard (GB231-84), the ratio of 0.102f /D commonly used in brinell hardness test is 30, 10 and 2.5. According to the types of metal materials, hardness range and thickness of samples, the diameter D, test force F and retention time of test head (steel head) are selected according to the following table (brinell hardness test specification).

 

Introduction for Rockwell hardness test blocks:
Rockwell hardness test is a simple and rapid hardness test method. Rockwell hardness test method is widely used in manufacturing and scientific research. Rockwell hardness test is to apply the test force (initial test force and total test force) on the surface of the tested material with the standard pressure head twice, and then press the pressure head into the surface of the sample under the action of the test force. In total test force after a certain period of time, remove the main test force, to keep the initial test force under the condition of measuring depth, pressure to the total test force down into the depth and in the early test force under the difference between the pressure into the depth of the residual pressure (the so-called depth) to characterize the level of hardness, residual pressure into the depth, the greater the hardness value is lower, and vice versa. The sign for rockwell hardness is HR. In order to adapt to the application of different materials, rockwell hardness scale (A, B, C, D, E, F, G, H, K, L, M, P, R, S, V...

 

Introduction for Vickers hardness test blocks:
Vickers hardness measurement principle is basically the same as brinell hardness, is also based on the indentation unit area of the load to calculate the hardness value. The difference is that the pressure head of vickers hardness test is the regular quadric pyramid of diamond. During the test, under the action of a certain load, a square cone indentation is pressed on the surface of the sample. The diagonal length of the indentation is measured and divided by the surface area of the indentation. The value of the load divided by the surface area is the hardness value of the sample, represented by the symbol HV.
 
Vickers hardness code: HV
Unit: kN/was
 
Vickers hardness - a criterion for hardness of a material. It was first proposed by British scientist vickers. With the load of 49.03~ 980.7n, press the material surface of the square tapered diamond press with the opposite Angle of 136°, keep the specified time, measure the diagonal length of the indentation, and then calculate the hardness according to the formula. It is suitable for the hardness measurement of larger workpiece and deeper surface layer. Vickers hardness still has a small load vickers hardness, test load 1.961~< 49.03n, it is suitable for thinner workpiece, tool surface or coating hardness measurement; Microvickers hardness, test load <1.961N, suitable for the hardness determination of metal foil, very thin surface layer.
 
HV- is suitable for microscopic analysis. Vickers hardness (HV) is determined by pressing a diamond square cone press with a load of less than 120kg and a top Angle of 136° into the material surface and dividing the load value by the surface area of the indentation pits.
 
The vickers hardness tester has a wide range of measurements, from very soft materials (several vickers hardness units) to very hard materials (3,000 vickers hardness units).
 
Introduction for Shore hardness test blocks:
TYPE D shore block:1 box of 7 pieces, each in a different color 
Test range HA32 HA46 HA52 HA55 HA72 HA81 HA87
Purple coffee green orange red yellow black
Shore hardness - introduction to shore hardness
 
TYPE A shore block: 1 box of 3 pieces, each in a different color
Test range HD14 HD29 HD88
Orange black gray transparent
Generally, feel elasticity is relatively large or soft products, testers can directly determine the use of shore A hardness tester test, such as: stationery bottles, TPU TPR plastic film bags and other products. And feel is basically not elastic or hard can be tested with shore D hardness tester, such as: PC ABS PP and other products. If the degree is shaw Axx, the hardness is relatively low, if the degree is shaw Dxx, the hardness is relatively high.
Supplement:
Shaw's units are not enough:
1. The unit expression for type A is :HA
2. Type D unit expression is :HD
 
 
Products Specification Measure(u. mm)
Rockwell block (28-88)HRA Φ60×10
(20-65)HRC
(88-100)HRB
Rockwell Superficial block (79-91)HR15N Φ60×10
(42-80)HR30N
(20-70)HR45N
(88-93)HR15T
(70-82)HR30T
(55-72)HE45T
Brinell block (150-600)HBW 10/3000 Φ90×15
(150-600)HBW 5/750
(150-600)HBW 2.5/187.5 Φ64×12
(75-125)HBW 10/1000 Φ90×15
(75-125)HBW 5/250
(75-125)HBW 2.5/62.5 Φ64×12
Hammer Brinell block (150-500)HBW 5/750 12×12×150
(150-500)HBW 5/3000 14×14×150
Vickers block (150-750)HV5 Φ60×10
(150-750)HV10
(150-750)HV30
Micro vickers block (200-300)HV0.05 Φ25×5
(200-300)HV0.1
(400-500)HV0.1
(400-500)HV0.2
(700-800)HV0.2
(700-800)HV0.5
(700-800)HV1
Leeb hardness block (490-570)HLD Φ90×55
(590-670)HLD
(750-830)HLD
Leeb hardness block for device G (460-540)HLG Φ120×70
(550-630)HLG
Étiquettes:

machine d'essai de dureté

Testeur de dureté des métaux

hra hardness test blocks